JL Audio M200 10in Marine Subwoofer with LED and Gray Sport Grille - 010-04759-01
JL Audio M200 10in Marine Subwoofer with LED and Gray Sport Grille
Model: 010-04759-01
- 250-WATT RMS POWER HANDLING
- RGB LED LIGHTING
- LONG-EXCURSION DESIGN DELIVERS DEEP AND POWERFUL BASS
- INTERCHANGEABLE GRILLE OPTIONS (SOLD SEPARATELY)
- MARINE-GRADE CONSTRUCTION
This 10-inch subwoofer features an injection-molded polypropylene cone and rubber surround with a marine-grade synthetic spider to keep the cone under control for tight bass response.
Enhance your audio experience with a wide spectrum of colors. Pair with the Garmin Spectra™ control module (sold separately) for advanced lighting control from your compatible chartplotter or the ActiveCaptain® app.
With 250-watt RMS power handling and a long-excursion design, this subwoofer delivers powerful and deep bass with less distortion.
Match the look of your vessel with white or gray color options along with interchangeable grilles (sold separately).
Sail to your heart’s content knowing that your speakers are built from marine-grade materials and finishes with corrosion-resistant connections and circuit boards to withstand salt and sun.
M200 marine subwoofers are purpose-engineered to operate without a dedicated enclosure, needing only a moderate amount of air behind them.
Specifications
| General | |
| Warranty | 3 years |
| Color | Gray Sport Grille |
| Physical dimensions (Diameter) | 10.84" (275 mm) |
| Physical dimensions (Depth) | 5.16" (131 mm) |
| Weight | 10.69 lbs (4.85 kg) |
| Water and dust rating | IPX6 |
| Speaker type | Infinite Baffle Subwoofer |
| Continuous power handling (RMS) | 250 W |
| Sensitivity (SPL @ 1 W/1 m) | 86 dB |
| Nominal impedance | 4 Ω |
| Recommended amplifier power (RMS) | 250 W |
| LED lighting | yes (RGB) |
| LED supply voltage | 10 - 14.4 VDC |
| LED load current @ 14.4 VDC (max) | 220 mA |
| Cone material | Injection-molded, polypropylene |
| Electrical Features | |
| Compass-safe distance | 116" (295 cm) |
| Networking & Connections | |
| Speaker connections | Spade connectors |
| LED connection | Flying lead with waterproof connector, 4-conductor 20 AWG wire |
| Mounting Dimensions | |
| Mounting depth clearance | 5.16" (131 mm) |
| Frontal grille protrusion | 1.85" (47 mm) |
| Mounting hole | 8.75" (222 mm) |
| Bolt hole circle | 9.72" (247 mm) |
| Parameters | |
| Free Air Resonance (FS) | 47.15 Hz |
| Electrical "Q" (Qes) | 1.005 |
| Mechanical "Q" (Qms) | 11.532 |
| Total "Q" (Qts) | 0.925 |
| Equivalent Compliance (Vas) | 0.88 cu ft (24.93 L) |
| One-way linear excursion (Xmax; specs are derived via one-way voice coil overhang method with no correction factors applied) | 0.39" (10 mm) |
| Effective piston area (SD) | 48.67 in² (0.0314 m²) |
What's in the Box:
- One subwoofer with grille
- One 0.25" female crimpable connector
- One 0.185" female crimpable connector
- One water-resistant 4-pin connector
- Mounting screws
- Documentation
- Genuine manufacturer products
- Authorized marine electronics retailer
- Secure checkout
- Ships from authorized U.S. distribution partners
- Expert marine electronics support available
Customer feedback